Salta al contenuto principale
Aiuto

Moderazione

Visualizza:

Voti Approvati
Scorciatoie da tastiera

Chiunque supera la reputazione 20 può contrassegnare commenti e post problematici.

ACCETTA COME SOLUZIONE

Post: Rispondi a "Washer makes very loud noise during spin cycle"
Ultima Votazione:
Votanti: oldturkey03 (Admin Ha Deciso)

Nascondi dettagli

Domanda

Washer makes very loud noise during spin cycle

My washer makes a very loud noise during the spin cycle (it does not make the load noise during any other cycles). The load is balanced and the drum is not wobbling side to side.

I have the same problem, it’s the drum bearings and seal. The seal leaks and water gets in the bearings and destroys them, hold the outer drum then try to move the inner drum, if it moves at all it’s gone!!

I'm going to pull mine apart and goto an auto parts place to match them! If that doesn't work will try to find them by the old part number on each one, I have two bearings and one seal. Good luck!

Dan


Risposta

Dan,

If your Kenmore 110 Series Washing Machine is making strange noises, see the Kenmore 110 Series Washing Machine Makes Unusual Noises problem page for possible causes and solutions.

Please give us the model number of your machine and we'll get you to the correct parts. An auto parts place is not going to have what you need.

If the washer is making a loud noise in the spin cycle, the clutch assembly might be worn out. The clutch assembly makes the connection between the transmission and the inner tub. It is designed to allow the tub to get up to the proper spin speed gradually. As the clutch wears out it may become loud during spin or just after the spin cycle finishes. The clutch is not repairable, if it is loud or not working properly it will need to be replaced.

This is probably the part you need: http://www.repairclinic.com/PartDetail/C...