I replaced the housing of my iPhone 6, now my back camera isnt focusing anymore.
So I thought I broke the camera, I replaced the camera with a new one but it is still the same issue.
The images are blurred, can anyone help me with this?
Questa è una buona domanda?
Rep: 221,6k
15
292
807
I would check out the "lens" in the housing. It may be dirty or have a fingerprint on it. You will need to clean it with either a magic pen or some IPA and a clean q-tip.
Questa risposta è stata utile?
It is a custom housing and I believe it doesnt have a lens in the housing.
Could that be the problem?
If there was no lens, then it wouldn't be blurry unless it was the camera itself that was the issue.
Rep: 21,2k
5
19
70
Hi,
Custom or non original housings tend to have a low quality plastic lens.
This would need removing and replaced with a glass lens.
Or there may be dirt on the lens itself.
Questa risposta è stata utile?
Or a foil of protective nylon.
Or that also!
Rep: 149
4
3
If the lens is missing it causes a blurry picture.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 3
Tutti i Tempi: 374
1 Commento
I will open my phone tomorrow and let you guys know, thanks!
da Zackito