Oppo Reno 2f Touch screen repair

Oppo Reno 2f Touch screen repair

@gorkaarand83900 TV's use a small circuit board that has the IR receiver for the remote on it. That is what translates the signals for the remote and send s those to the mainboard. Since you have already checked and replaced the remote itself, I would try a new IR board. Since you have not told us the exact model of our TV, we can't provide a part number or further assistance.

Translation

@gorkaarand83900 Los televisores utilizan una pequeña placa de circuito que contiene el receptor de infrarrojos del mando a distancia. Es lo que traduce las señales del mando y las envía a la placa base. Dado que ya has comprobado y sustituido el mando a distancia, yo probaría con una nueva placa de infrarrojos. Como no nos has indicado el modelo exacto de tu televisor, no podemos proporcionarte el número de referencia ni más ayuda.

@gorkaarand83900 the IR board is inside what Sony calls the "Smart Core Block" and it looks like this (example only). The board you are looking for is number 106

The Sony part number is for the HIR Board is A-1930-362-A . Here is how you get to the complete Smart Core Block

Translation

@gorkaarand83900 La placa IR se encuentra dentro de lo que Sony denomina «Smart Core Block» y tiene este aspecto así (solo ejemplo). La placa que estás buscando es la número 106

. El número de referencia de Sony para la placa HIR es A-1930-362-A. Aquí tienes cómo acceder al Smart Core Block.en.es completo.

Tengo una Sony bravia, y el mando no funcionaba. He comprado uno nuevo, pero tampoco funciona. Yo creo que es el receptor da la TV, que puedo hacer?

Fingerprint sensor is disappeared in my settings

So I've somehow snapped a physical connection on the power button (the only button found on the right side of the s10). It falls out easily, I am currently holding it in place with a piece of tape.

As far as I can tell all of the electrical components seems to be functioning as I can still short press (turn off the display) and long press( display the full power menu).

Curious as to what would be involved in replacing the button.

Having an issue with a 2022 MacBook Pro'13 M2

My trackpad no longer produces a mechanical click in the top-left corner. It still detects touch in that area, and the cursor tracks normally everywhere.

What I’ve observed:

• Using the TrackWeight app, overall pressure seems off, which makes me think it’s a pressure/mechanism issue.
• I can press the surface down in the top-left, but it doesn’t register a click.
• Clicking works everywhere else, and if I press in the middle, the left up button clicks as expected.

What I’ve tried:

• Restarted the laptop.
• Performed resets (including the “paper method”).
• No change after any of the above.

Question:
Do I need to replace the touchpad, or is there an adjustment/repair that can fix this?

Also i forgot to mention when i press down the middle i am able to click the button

I ordered a new battery and installation kit for my iPad Air2 a while back. It was sitting in a drawer while I was out of town for a couple weeks and when I went to go use it when I returned I found the device burst open because half of the battery swelled up dramatically. It worked just fine until this happened. Why would only one swell up? installation issue? or just happened that one of the pouches was destined to fail? I checked the warranty period is one year, but of course I ordered it a little over a year and a half ago. It worked great for about a year after I installed it. Any suggestions? just order a new battery again and hope for the best? I would think if it was something I did wrong they would both fail but I don't know.

Just thought I would add, the iPad was not plugged in while I was away. I don't recall what the state of charge was when I left. I typically charge it up then unplug it until it needs charging again. whatever happened in that pouch was pretty dramatic I'm glad it didn't burst and burn the house down! 💣😁

How do I wire up a dent puller welder? stud welder and a dent puller in one ? I bought it thinking it was a functioning machine put its just the shell can you help me out, I've looked everywhere to find a manual to show me how and i got nothing>