Start by listing what you want to protect.

This could include personal data, financial information, online accounts, devices, etc.

Printer stopped working

Support code B203 says to turn off printer and contact service centre.

An extended period turned off allowed it to print a few pages before error B203 again.

This only worked once.

Is there any at home fix.

My right joy-con has had this weird issue where it is completely unresponsive to anything when disconnected from the system, when connecting to the system it plays the animation and displays the correct color but remains unresponsive and unrecognized, and only once the system itself is plugged into any kind of power source does the joy-con come to life and behave completely normally, EXCEPT for the fact that the left joy-con and system battery indicators will display that they are charging, while the right joy-con displays the icon for a fully charged, not currently charging battery.

Now, this started after I opened the thing up, so I most certainly messed something up, but I'm completely stumped as to what. I've reseated every connector and ribbon cable in the joy-con at least once, swapped the batteries between the left and right joy-con (left joy-con functioned fine with either battery, right joy-con has the same issue with either battery), and recreated the fault on a friend's switch to ensure that it IS a fault of the joy-con itself. Not really sure where to go next outside of just ordering a new one, but I'd rather this one not just be a paperweight

I've discovered another weird behavior. If I use the disconnect controllers menu to completely unpair the joycon, it will, upon re-pairing, work completely fine again even with the system not currently charging. While this is in effect, checking the controller menu will show the system and left joycon at whatever their charges are, but the right joycon will show as being nearly depleted. Once I disconnect the joy-con, however, it will return to all of the behaviors outlined in the post until I go through this process again.

I was going down highway, had car set on cruise control when I went to hit my brakes it wouldn't slow down, so I tried to speed up it wouldn't do that either. Then my rooms would go from 0 to 60 then 0 to 60. I pulled over and shut car off for few minutes what could be going on with my car. Please help me.

When I run my washing machine, it will get hung up when it is time to drain. The machine will have a buzzing sound and the water will not drain. Sometimes I will get a DRN error code. If I reset the machine, sometimes that works and it will drain. Other times I will have to reset it multiple times before it works. Sometimes I can run 10 loads of laundry and it never has an issue.

I took it apart, cleaned the hose, pump looked good. Had a repairman look at it, he also said the pump was good. Any help?

Tv was working fine then kid threw something at tv . there are no cracks but looks blue screen and i have sound. just need to know if i need a new t-con board or leds replaced.