Salta al contenuto principale

iPad 2 Wi-Fi EMC 2560 Kabel zum Lautstärkeregler und zur Einschalttaste tauschen

Inglese
Tedesco

Traduzione in corso passo 11

Passo 11
iPad 2 Wi-Fi EMC 2560 Volume and Power Button Cable Replacement: passo 0, immagine 1 di 2 iPad 2 Wi-Fi EMC 2560 Volume and Power Button Cable Replacement: passo 0, immagine 2 di 2
  • If your replacement part comes with the metal button brackets attached, you can skip the following steps.

  • Peel the power button off of the power button bracket.

  • Note the orientation and adhesive placement for reassembly.

Wenn bei deinem Ersatzteil die metallenen Tastenhalterungen dran sind, kannst du die folgenden Schritte überspringen.

Löse die Einschalttaste von ihrer Halterung ab.

Merke dir die Ausrichtung und die Klebestellen für den Wiederzusammenbau.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.