Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 7

Passo 7
Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two. Throughout this procedure, be careful not to damage any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.
  • Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two.

  • Throughout this procedure, be careful not to damage any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.

  • When using the hot iOpener method, if you encounter significant resistance to prying, stop and use the iOpener to reheat the section you're working on.

在最右侧的电池和上盖之间插进一张塑料卡,将两者之间的粘合剂一分为二。

在此过程中,请注意不要用工具损坏任何电池。 损坏的锂离子电池可能会泄漏危险化学物质和/或着火。 只能使用塑料撬工具

当使用热的iOpener时,如果阻碍感明显,请停止并使用iOpener重新加热有障碍感的部分。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.