Salta al contenuto principale

Repairing a Kenwood Chef A901D That Emits a Burning Smell

Tedesco
Inglese

Traduzione in corso passo 8

Passo 8
Kenwood Chef Motorelektronik reparieren: passo 0, immagine 1 di 1
  • Drehe die beiden Einstellschrauben für die Geschwindigkeit heraus. Entnimm die Feder und die Schraubenklemme.

  • Die Geschwindigkeitsregelung ist raffiniert: Am Ende der Motorachse ist ein Magnet. Dieser erregt eine Spule auf der Leiterplatte verschieden stark, je nachdem, wie groß der Abstand ist. Der Abstand kann mit diesen Einstellschrauben justiert und dem großen Regelknopf verstellt werden. Diese Regelung hält auch unter Last die Drehzahl konstant.

Unscrew the two speed adjustment screws. Remove the springs and the screw retention clamps.

This is a simple explanation of how the speed regulator works: At the end of the motor shaft is a magnet. This induces a coil on the PCB to a different degree, depending on distance. The initial distance of the magnet can be adjusted with the adjustment screws and the large control button. This regulation also keeps the speed constant under load.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.