Salta al contenuto principale

Repairing a Kenwood Chef A901D That Emits a Burning Smell

Tedesco
Inglese

Traduzione in corso passo 9

Passo 9
Kenwood Chef Motorelektronik reparieren: passo 0, immagine 1 di 1
  • Löse die Thermosicherung aus ihrer Halterung.

  • Entlöte die Kabel am Ein/Ausschalter.

  • Ziehe die Leiterplatine vorsichtig heraus.

  • Drehe die beiden Schrauben heraus, mit denen die Platine auf ihrem Träger befestigt ist.

Remove the thermal fuse from its holder.

Desolder the cables connected to the on/off switch.

Pull out the printed circuit board carefully.

Remove the two screws that secure the board to the plastic case.

(In the picture, all the steps were already completed.)

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.