Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 5

Passo 5
Remove the front panel assembly. If you experience "ghost" or "phantom" touch input issues with your new display, this can be resolved by adding a layer of very thin insulating tape, such as Kapton (polyimide)  tape, to the highlighted areas on the back of the panel. iFixit panels come with the proper insulation, and should not require the addition of any tape.
  • Remove the front panel assembly.

  • If you experience "ghost" or "phantom" touch input issues with your new display, this can be resolved by adding a layer of very thin insulating tape, such as Kapton (polyimide) tape, to the highlighted areas on the back of the panel. iFixit panels come with the proper insulation, and should not require the addition of any tape.

  • Without the proper insulation, these areas of the digitizer can ground out against other components, causing touch input malfunction.

  • The insulation is not visible to the naked eye, and is different from the foam dust barrier strips found on many iPads.

Remueve el ensamble del panel frontal.

Si estas experimentando problemas "fantasma" o "espectro" con la entrada de touch en tu nueva pantalla, esto puede ser resuelto añadiendo una capa de cinta aislante muy delgada, como cinta (poliamida) Kapton, a las áreas destacadas en la parte de atrás del panel. Paneles de iFixit vienen con aislante apropiado, y no deberían requerir la adición de cualquier cinta.

Sin aislante apropiado, estas áreas del digitalizador pueden conectarse a tierra con otros componentes, causando problemas de la entrada de touch.

El aislante no es visible a simple vista, y es diferente de las tiras de barrera de espuma de polvo encontradas en muchas iPads.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.