WowWee MiP Robot Tire Replacement

Ultimo aggiornamento il December 19, 2023

15 - 20 minuti

Facile

Introduzione

This guide is designed to help users remove MiP’s wheels. MiP has two wheels that are connected to its body with screws. If the wheels need replacement or cleaning, follow this guide.

Cosa ti serve

Strumenti

Mostra di più…

iFixit guadagna commissioni quando acquisti tramite questi link.

Passo 1 Wheel

WowWee MiP Robot Tire Replacement, Wheel: passo 1, immagine 1 di 2

WowWee MiP Robot Tire Replacement, Wheel: passo 1, immagine 2 di 2

Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.
This plastic material is not replaceable. Any damage will be noticeable.

Traduci

The hubcap won't come out. It's flat & tight. Even a tiny screwdriver for eyeglass repair can not get under it. Any tricks forgetting it out?

donna.hester7 - 28 nov 2020 Replica

Passo 2

Remove the 12.0 mm Phillips #2 screw.
Hold the wheel in place, or it will rotate as you attempt to remove the screw.

Traduci

Passo 3

Pull the wheel off of the square axle.
Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

Traduci

Passo 4 Tires

WowWee MiP Robot Tire Replacement, Tires: passo 4, immagine 1 di 2

WowWee MiP Robot Tire Replacement, Tires: passo 4, immagine 2 di 2

Remove the three 7.7 mm Phillips #1 screws.

Traduci

Passo 5

WowWee MiP Robot Tire Replacement: passo 5, immagine 3 di 3

Separate the rubber tire from the rim.
Push the collar out to separate the plastic layers of the wheel.
When reassembling, align the groove and the key of the two wheels' halves together.