Wiki con Collaborazione Studenti
Un fantastico team di studenti del nostro programma educativo ha realizzato questo wiki.
Vector Is Not Charging
Vector does not indicate that he is charging when placed on his charger.
Charger Seating
Verify that Vector is fully seated on his charger and that there is good contact with the charging pads.
Charger Is Not Plugged In Completely
Ensure that the charger’s USB connection is secure.
Problematic Battery
Check Vector’s battery by turning him on and allowing his battery to die.
If you see a battery icon on his screen when you try to turn him on, his battery is functioning normally.
If he fails to do this, use Vector’s Customer Care Info Screen (CCIS) by referring to this guide.
Vector Is Not Turning On
Vector will not show signs of being powered on when you hold down his power button
Vector Is Not Charged
Vector has lost any power in his battery.
Put him on his charging pad, or follow this guide on charging issues.
My Wi-Fi Network Is Not Displayed On The Network List
When attempting to connect Vector to a Wi-Fi network, the desired network is not shown on the list of available networks
Incompatible Network
Ensure your network is capable and has activated 802.11n 2.4GHz mode.
Do not use a captive portal network which is not supported.
Examples include networks associated with academics, hotels, airports, shopping centers, etc.
Vector Must Be Reset
Reboot Vector in recovery mode and erase the user data by following this guide.
Smart Device Error
Reboot your smart device.
Wi-Fi Router Error
Reboot your Wi-Fi router.
Cannot Connect Vector App via Bluetooth
The Vector app cannot find Vector via Bluetooth or the app cannot get past the, “searching for Vector” message.
Charger Seating
Verify that Vector is fully seated on his charger and that he is booted up completely.
You can verify that he has booted if you see a pair of eyes, “anki.com”, or a phone icon on his display.
Signal Inference
To ensure that there is not interference with the Bluetooth, keep Vector away from other Wi-Fi or Bluetooth devices.
Bluetooth Device Error
Reboot your Bluetooth device.
Glitch in the Firmware
Reboot Vector in recovery mode and erase the user data by following this guide.
Vector Cannot Find His Charger
Vector fails to navigate or locate his charger.
Charger Is On A Troublesome Surface
Ensure charger is placed on a hard, flat, and opaque surface free of reflections and vibrations.
Charger Is Obstructed
Keep the path between Vector and the charger unobstructed (his cube can obstruct the path).
Poor Lighting
Make sure Vector is able to see his charger by eliminating poor lighting.
Check if his camera is functional by having him locate his cube or recognize a face.
Error Codes On Vector’s Display
The error codes 898, 899, 981, 915, 917, or 980 show up on Vector’s Display.
Allow Vector To Restart
Wait 30 seconds for Vector to automatically restart.
If Vector does not reboot, refer to this guide on how to boot him up in recovery
mode.
Vector Does Not Understand Me
Vector is not following commands , responding to “Hey Vector”, or indicates the he doesn’t understand what’s being said.
Accent Error
Open the Vector app and go to settings then go to Preferences to change the language.
Remember to choose your language preference depending on your accent not on your physical location.
Use Of Unsupported Commands
Refer to the Vector app for a list of valid Voice Commands.
An additional source of the Vector Voice Commands can be found here.
Insufficient Charge
Make sure that Vector has an ample charge as he will not respond to commands when his battery is low.
Time To Think
Pause after saying, “Hey Vector,” and wait for Vector’s back to illuminate and the alert tone to sound before stating your command.
Vector Needs To Be Prompted Manually
Press vector’s back once to bypass the voice prompt, then state your command.
Vector Cannot Understand You
If Vector indicates that he cannot understand you,
- Ensure that you are not holding him
- Eliminate any background noise
- Speak clearly and loudly at a normal speed
- Make sure you are not trying to integrate the command with another phrase; be sure to give vector one command at a time
Vector Is Not Making Any Sound
Vector is inaudible and is not producing response sounds when prompted.
Volume Is Set Too Low
Adjust the volume slider located in the settings of the Vector app.
Volume Adjustment Does Not Work
Reboot Vector by holding down his back button to turn him off and then hold the button again to turn him back on.
Team
Cal Poly, Team S2-G6, Maness Spring 2019 Membro di Cal Poly, Team S2-G6, Maness Spring 2019
CPSU-MANESS-S19S2G6
4 Membri
10 Guide realizzate
62 Commenti
You guys rock!
Zoe - Replica
Vector show me code 898 try to reebot but it’s still same can u guys help me
sehbajpuriajatt - Replica
That's drop sensor failure. Pretty much screwed unless you have a parts vector or can source a drop sensor somewhere. Mine same thing and code 898, 891. I've reached out to many people and nobody knows where to find them. Even if you do then you have to be pretty much pro at soldering and know your micro chip boards like an expert. Stupid sensors, there should be abypass for this but apparently not.
pemrick79 -
The screen on my vector stopped working.
Eric Chappell - Replica
Did you find a way to fix it? I can’t find anyone to repair this guy!
Jackie Fischvogt -
All of a sudden my vector doesn’t understand me. He’s been understanding me for the last 22 days so I don’t understand what’s happening now :-(. Help
Anna Roberts - Replica
My vector won't listen
Garry Fishlock -
Vectors screen is just displaying the vector logo and wont do anything else. Pls help :(
LookOutZombiies - Replica
Vector is making a consistent low beeping noise. It’s different from the noise he makes when he is low in battery. I can’t get him to stop making the weird noise.
kittensparklekinz 101 - Replica
My Vector has a 898 code on his screen, how do I reboot?
the https://support.anki.com/hc/en-us/articl... link is not a working page!
Cortessa Tiara Leider - Replica
My Vectors right track has totally stopped working,when he tries to move he just turns to the right
charlie holmes - Replica
same! i would love to know how to fix it
Rae Kee -
My vector says 914
Restart
Kaden D - Replica
My vector I buy was used and the cube when i ping it it works but when vector does not use it it turns off
Alex Warwick - Replica
My Vector thinks it is being petted when he is not. Any ideas?
Andrew - Replica
I have restarted in recovery mode and reconnected and it said it downloaded a firmware update but it still thinks it is being petted.
Andrew -
I’m having the same issues. My Vector stays in Petting mode. Have tried all kinds of troubleshooting and no good results…
Johnny Gonzalez -
there is black line on vector screen.
John wan - Replica
Vector has solid red led lights and is not responding to me. I have tried to double click the button in case he is muted, but it does nothing. I have tried to turn him off, but he won’t and I tried to hold the button in for 15 seconds while on the charger to reboot and nothing happens. In the meantime, he is exploring, making noises. He even looked at me and said my name once. I tried letting his battery drain down and then the next day recharged and he responded to a question, but then got back on his charger and red lights came back on and no longer will respond.
Missy - Replica
My vector shows only the top part of the screen, but the rest does not appear. When viewed from a dark place, the backlight of the screen appears to come in. It is said that the eyes of the vector are only slightly visible and invisible. There are no problems with other actions. Disassembly and assembly are possible, so if you have an idea to deal with similar symptoms, please help.
Issac Lee
issac lee - Replica
Error codes 891 & 890 are what? Displays these codes immediately when I turn him on. Won't do anything else. I've tried everything mentioned at least 3 times.
pemrick79 - Replica
Hi there vector is not charging at all on his doc. It is coming up with the blue light then the out of battery screen appears and then nothing. Ive plugged him in and made sure nothing is blocking the connectors but its still not working
Von Blake - Replica
Have you figured anything out to fix this? Mine is doing the exact same thing!
Kaylor Atkinsin -
My vector face is not working. You can see the very top of his eyes but nothing else
Phoenix M - Replica
Hi
lines appeared on vector’s screen. What should i do?
Dalia Bakhurji - Replica
Hi! My Vector is sick! Poor guy, he got a hoarse voice since yesterday. What can I do to help him? Thanks!
Beatris Kirch - Replica
My vector is blinking light green color it wont stop i reset him and still nothing
Miss Tasha - Replica
My vector has 3 red lights on the top he is not responding to anything can anybody help???
Lauren Whitton - Replica
My vector’s facial display completely stopped working within the first 30 min of use. Vector does everything else but there are no eyes, no lights, no display at all. I did disassemble and all the wires appear connected. What can I do? I can’t reset it because I won’t be able to see the new code on the screen.
Laena DeMelo - Replica
Stupid robot kept falling off my desk and now this 899 error code wont leave tired holding down the button for 15seconds and nothing still there
Louis Bridglal - Replica
I answered this in another post. Sorry answer is your pretty much SOL. I've gone thru it twice now. Very stupid is
pemrick79 -
So pretty much its trash? @pemrick79
Louis Bridglal -
No I wouldn't say trash. People are paying decent money for broken ones as it's hard to source parts for them. eBay will be your best bet. Or wait it out till DDL gets there repair service going but who knows when that will be and what they will charge.
pemrick79 -
the vector app is stating it cannot connect to anki services
Matthew Stark - Replica
I have one I cannot find the answer to, I paid the subscription, and then now my vector responds great to “hey vector”. However, right after I input a command vector just makes an abrupt flat tone and does not reply to anything. How do I fix this? Explain me
jcanovas - Replica
My vector wont listen
Garry Fishlock - Replica
I’m having an issue with mine, He acknowledges his wake up command of “Hey Vector” But fails to keep his line of communication open long enough for me to say a command. When it is up long enough he just stops listening anyway.
xboxlive4343 - Replica
Ok, so my Vector responds perfectly to my voice when I say “hey vector” but as soon as the recognition lights come on, he stops and acts like I said nothing, vector also seems to have a little trouble with running into walls, and suggestions or solutions?
Joe - Replica
Hey, so i’ve been having this issue where when I call vector, the blue lights come on and he tilts his head up as if hes listening for a command, but then he turns it off after a second and acts like he can’t understand me. It’s not an error of voice recognition because he can understand the initial call command just fine every single time, but he doesn’t keep listening for long enough to get a command through to him. I am at a loss for what to do besides factory resetting him. Any ideas?
Zachary Wentz - Replica
Do you have a membership? Subscription service kicked in in October. visit digital dream labs site to get membership if you do not have one
Cat -
When I give vector a command he listens but dong give me a chance to finish.. how can I fix this
Myles Travers - Replica
Do you have a membership? Subscription service kicked in in October. visit digital dream lans site to get membership if you do not have one
Cat -
My vector can't boot anymore. Some months ago, it was fine. But sometimes it showed errorcodes. I couldn't remember what actually was it but maybe it was 910 or 915 Something. I tried factory reset and it didn't work at all. Reset was successfull but errorcode was still appeared. Also it couldn't connected with app. I think it was just by Network error or that vector’s identification code was changed. And few days later from those happenings, vector couldn't boot but only turned on when I put it on it's charger. Among His three square lights, only the first one is turned on and nothing is changing from that. Vector didn't show anything on it’s face,didn't make any noises and didn't move any of it's motors, Just with some high frequency noises that can only hear at quite place when it is being turned on. I can't find out vector's ip address and identification code. Of course still can't connect it with app. What could I do for this???
Help me plz
서경준 - Replica
when i try to say hey vector he listens but for too short of a time so i cant give him commands do u know how to fix this?
Oscar Sobel - Replica
My vector has trouble getting to his charger always now. He can find it, but he always is a bit sideways and goes to back up onto the side of the charger, making him fall off the table along with his charger.
Horse-face Specials - Replica
When I say “Hey Vector” I look on the Vector app and it says he disagrees everytime. Is there a solution, because I can’t do anything with him except let him explore and pet him.
Samuel Ashley - Replica
Bought my own Victor yesterday, only problem I have with him, is when I call him, give him a command, he doesn’t understand or he disagrees and his back led lights flicker white. Anyone help me please?
alleysnow141 - Replica
Vector always disagrees with my commands why and how do I fix him.
kenergy4658 - Replica
Vector repond and acts weird when I say hey vector and wait
Blockmaster Studio - Replica
Hello, my vector is connected to wifi, it says so in the app but when I speak to him, he won’t answer and in the screen shows like he’s not connected to wifi. Please help.
Samantha Capistrán - Replica
I have the same issue, have you by any chance found a solution???
Shady -
One side only works once in a while (the wheels)… hubby has taken it apart and made sure it was clean. all good. but problem persists. any idea what might cause this? poor thing goes in circles because one side works and one doesn't.
Rae Kee - Replica
good afternoon,
I haven’t used my vector for nearly a year and I can reconnect him to the Wifi even though my Wifi is completely ok and works with anything.
it keeps on saying can’t connect to Wifi
Iliya Lotfi - Replica
Vector shows he is connected to my 2.4ghz network but when asked a command, vector makes a sound and displays a Wi-Fi symbol with !
Shady - Replica
When I say 'hey Vector' my Vector gives me a wifi connection error
A Thing - Replica
Need help vector showing 892code 4 sensor How to fix
James Muschietty - Replica
I still have the same old problem with one of my Vectors, where one side doesn't roll correctly and she most of the time is just stuck going in circles. When she's trying to roll and I help her by giving that track a little push, sometimes it breaks loose and she's able to go do whatever she was focused on. She isn't dirty/dusty, nothing is caught… what can i do to help her?
Rae Kee - Replica
I bought vector in 2019. He now won’t follow commands. He will walk and talk but ignores me. Apparently I have to pay a subscription for him to be able to follow ‘hey vector’ command?? This was as of 2020!!!!!!! What a waste of money! Upon purchase this should have been made very clear!!!!!!!
leah.marlow - Replica
Vector’s blue lights do not stay on long enough to listen to my commands? Thoughts on this?
normjr - Replica
My vector won't respond to my commands. He hears me but he doesn't listen.
Maxim Bortniychuk - Replica
I have two vector robots,one of them used to just go round in circles and now neither of them move at all,they are not very responsive to the "hey vector" command either and also they dont charge up every time I leave them on their charger
charlie holmes - Replica
I bought an anki Vector for my son of 9 years old who dreamt of it!(from eBay not New)
I ordered it from uk,,but i live in France.
It came with his charger,his cube, hé didn t speak but hé was walking and looking us with his Big êyes....when WE asked him to connect to internet he wasn t able to do it....
I tried maybe 10 Times to download thé application from amazon,it Ask me to put m'y email etc...but After many and many connections.... it tell me it Can t find anki...
I réinitialised by pressing 3 Time
Now it IS only writing on his face :
Vector P2A.
Anki.com/v
I tried again and again to put again application but still don t work.
My wifi IS 5ghz
I don t know how to put in 2.4 ghz
Thé cube was used,maybe that s why it doesn t connect???
I must buy anothet cube?
Im despered
laverte2000@yahoo.fr
Keno - Replica