Skip to main content

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 6

Step 6
Starting where the last pass left off, insert the metal spudger another two inches underneath the battery. As you push the spudger further underneath the battery, keep it as flat against the rear case as possible to avoid bending the battery. Repeat this process for the remaining adhesive strips.
  • Starting where the last pass left off, insert the metal spudger another two inches underneath the battery.

  • As you push the spudger further underneath the battery, keep it as flat against the rear case as possible to avoid bending the battery.

  • Repeat this process for the remaining adhesive strips.

À l'endroit où vous vous êtes arrêté, insérez le spudger métallique de 5 cm sous la batterie.

Quand vous poussez le spudger plus loin sous la batterie, maintenez-le à plat contre la coque arrière pour éviter de plier la batterie.

Répétez ce processus pour les autres bandes adhésives.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.