Salta al contenuto principale

Wie man die Leertaste wieder am Magic Keyboard befestigt

Inglese
Tedesco

Traduzione in corso passo 5

Passo 5
How to reattach a Spacebar Key to the Magic Keyboard: passo 0, immagine 1 di 1
  • Position the bottom of the key in the opening with the top tilted up and away from the keyboard.

  • You may want to take the top bracket off the key and put it into its spot in the hole first. I've done this with it on and off.

  • Apply pressure starting from the bottom and slide your fingers up toward the top of the key.

  • You should hear and feel the two lower connections to the scissors. The top bracket should naturally be in the correct space.

  • You should be able to tap the key and feel normal action from the top part of it. No matter where you tap it on the top half.

  • Do not apply excess pressure. Previous Mac Keyboards you just pushed down hard and it worked. Apply only enough to seat the key.

Lege die Unterkante der Taste in die Öffnung hinein, wobei die Oberkante schräg nach oben zur Tastatur steht.

Du kannst auch die obere Halteklammer von der Taste abnehmen und zuerst an die entsprechende Stelle in der Öffnung einsetzen. Ich habe beides ausprobiert.

Drücke die Taste an der Unterkante hinein und schiebe dann die Finger nach oben.

Du solltest spüren und hören, wie die beiden unteren Verbindungen einrasten. Die obere Halterung sollte an der passenden Stelle sein.

Wenn du die Taste bestätigst, sollte sie sich oben ganz normal anfühlen, egal, an welchen Punkten in der oberen Hälfte.

Drücke nicht zu stark. Bei früheren Tastaturen musste man nur kräftig hineindrücken und es funktionierte. Drücke nur so stark, bis die Taste festsitzt.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.