Salta al contenuto principale

Sostituzione display Teenage Engineering OP-1

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Teenage Engineering OP-1 Display Replacement: passo 0, immagine 1 di 3 Teenage Engineering OP-1 Display Replacement: passo 0, immagine 2 di 3 Teenage Engineering OP-1 Display Replacement: passo 0, immagine 3 di 3
  • Open the display cable connector by using a plastic opening tool to flip the latch upwards.

  • The display is held in place with a mild adhesive. A spudger helps you to get it free.

  • Now you can unplug the cable and take out the whole display.

  • After reassembly you want to perform the three function tests (0, 1 and 2) from the OP-1 special start screen. You can enter this menu by holding the COM key when powering up.

Apri il connettore del cavo del display usando uno strumento di apertura in plastica per far scattare verso l'alto il blocco.

Il display è tenuto in posizione da un adesivo poco tenace. Uno spudger può essere di aiuto per staccarlo.

Ora puoi scollegare il cavo e tirare fuori l'intero display.

Dopo il rimontaggio, puoi eseguire i tre test di funzionalità (0, 1 e 2) dello start screen speciale dell'OP1. Puoi accedere a questa modalità tenendo premuto il pulsante "COM" mentre accendi il dispositivo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.