Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 3le guide che includono questo passo.
Traduzione in corso passo 2
Passo 2
-
Remove the two 13mm screws, located between the feet on the bottom of the cover, using a Torx T15 screw driver.
-
On the TO1313SB, a Security Torx T15 driver is required — the screws have a center pin that prevents use of a regular T15 driver.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.