Salta al contenuto principale

Nintendo 2DS Motherboard Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Coreano

Traduzione in corso passo 3

Passo 3
Nintendo 2DS Motherboard Replacement, Remove Top Panel: passo 0, immagine 1 di 3 Nintendo 2DS Motherboard Replacement, Remove Top Panel: passo 0, immagine 2 di 3 Nintendo 2DS Motherboard Replacement, Remove Top Panel: passo 0, immagine 3 di 3
Remove Top Panel
  • The top panel can only be removed when the mother board is not secured.

  • There are two additional screws located on the top rail. Remove these to fully remove the buttons and top rail.

  • There are two screws holding down the joystick base that must be removed. (Be careful of the ribbon cable—it stays connected!)

  • Hold the top panel with your fingers and pull away from the device to remove it.

  • The top panel should come off easily, with very little force applied.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.