Salta al contenuto principale

iPad Air Wi-Fi LCDの交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 4

Passo 4
iPad Air Wi-Fi LCD Replacement: passo 0, immagine 1 di 3 iPad Air Wi-Fi LCD Replacement: passo 0, immagine 2 di 3 iPad Air Wi-Fi LCD Replacement: passo 0, immagine 3 di 3
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

  • If you are having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery.

ロジックボードにバッテリーコネクターを留めている2.3 mm プラスネジを1本外します。

ショートのリスクを減らすために、バッテリーブロッカーまたは改造した開口ピックを挿入してバッテリーの接続を外せます。

バッテリーブロッカーを使って、バッテリーを絶縁する際は、作業にご注意ください。バッテリーコンタクトは簡単に破損してしまい、取り返しのできないダメージをもたらすことがあります。

ロジックボードのバッテリーコネクターの下にバッテリーブロッカーを差し込み、作業中、この状態のままにしておきます。

ロジックボードの下にバッテリーブロッカーをはめ込むのが難しい場合は、トランプを使って バッテリーを外してみることもできます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.