Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 9le guide che includono questo passo.
Traduzione in corso passo 3
Passo 3
-
Use a T5 Torx driver to remove the following screws securing the right speaker to the upper case:
-
One black 6.8 mm screw
-
One silver 6.3 mm screw
-
One black 4.9 mm screw
| [* black] Use a T5 Torx driver to remove the following screws securing the right speaker to the upper case: | |
| [* red] One black 6.8 mm screw | |
| [* orange] One silver 6.3 mm screw | |
| [* yellow] One black 4.9 mm screw | |
| - | [* icon_note] The silver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it. |
| + | [* icon_note] The silver screw (in the corner) may be covered with a foam pad. If so, use your [product|IF145-020|tweezers] to peel it up and remove it. |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.