Salta al contenuto principale

Remplacement des connecteurs de la carte mère de l'iPad 4 CDMA

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 1

Passo 1
iPad 4 CDMA Logic Board Connectors Replacement: passo 0, immagine 1 di 1
  • Disconnect the following connectors from their respective sockets on the logic board:

  • Wi-Fi antenna cable

  • Speaker connector cable.

  • Dock/Lightning connector cable.

  • There may be a piece of black tape covering this connector. Remove it with tweezers.

  • Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.

Débranchez les connecteurs suivants de leur prise respective sur la carte mère :

Câble d'antenne Wi-Fi

Câble du connecteur du haut-parleur

Nappe du connecteur de dock/Lightning

Il se peut qu'un morceau de ruban adhésif noir recouvre ce connecteur. Retirez-le avec une pincette.

Assurez-vous de faire levier sous le connecteur et non sous la prise même. Le faire sous la prise risque d'endommager gravement votre tablette.

[* black] Disconnect the following connectors from their respective sockets on the logic board:
[* red] Wi-Fi antenna cable
[* orange] Speaker connector cable.
[* yellow] Dock/Lightning connector cable.
- [* icon_note] There may be a piece of black tape covering this connector. Remove it with tweezers.
+ [* icon_note] There may be a piece of black tape covering this connector. Remove it with [product|IF145-020|tweezers].
[* icon_caution] Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.