Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 22
Passo 22
Battery installation
-
Be mindful of the battery data cable and make sure it doesn't get pinched or trapped under the battery board.
-
If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place.
-
Carefully position the battery and set it into place.
-
Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.
| [title] Battery installation | |
| [* icon_reminder] Double-check the fit and alignment of your new battery before sticking it down. | |
| [* black] Be mindful of the battery data cable and make sure it doesn't get pinched or trapped under the battery board. | |
| [* black] If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as [product|IF317-072-4|Tesa 61395|new_window=true] to keep your battery in place. | |
| [* black] Carefully position the battery and set it into place. | |
| + | [* icon_note] Place the battery close to the logic board so the trackpad cable can reach its connector. |
| [* black] Press and hold each cell firmly for 5-10 seconds to secure it to the lower case. |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.