Philips Multigroom Razor Battery Replacement

Passo 1

Unclip the razor head.

Passo 2

Unclip the black cover, using a slim tool like an iSesamo or with some guitar picks. Insert the tool alongside the gap between the two pieces.

Passo 3

Remove the black back cover

Passo 4

Unclip the keypad from the bottom.

Passo 5

Unclip 8 grey clips (4+4 right and left).

Passo 6

Unclip the eight clear hooks from the hermetic waterproof cover (4+4 right and left).

Passo 7

Lift up the logic board.

Passo 8

Optionally you can desolder the solder joints circled in Red to separate the logic board from the motor, by doing so you can work in a more comfortable way while replacing the batteries

Passo 9

I bought single battery and I soldered them in the same position as the previous pack.