/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi

Remplacement de la batterie de l'iPad mini CDMA

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Francese
Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2
iPad Mini CDMA Battery Replacement: passo 0, immagine 1 di 2 iPad Mini CDMA Battery Replacement: passo 0, immagine 2 di 2

  • Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Flip the iPad back over and insert a plastic card between the top left battery and the rear case.

  • If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

Tout au long de la procédure suivante, vous ferez glisser des cartes plastiques fines entre la batterie et la coque arrière de l'iPad, pour séparer l'adhésif de la batterie. Veillez à garder les cartes aussi plates que possible pour éviter de plier la batterie, ce qui pourrait l'endommager et libérer des produits chimiques dangereux.

Retournez l'iPad et insérez une carte en plastique entre la batterie supérieure gauche et la coque arrière.

Si vous rencontrez de la résistance, réchauffez l'iOpener et répétez l'étape précédente pour donner à l'adhésif plus de temps pour ramollir.

[* icon_caution] Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.
-[* black] Flip the iPad back over and insert a plastic card between the top left battery and the rear case.
+[* black] Flip the iPad back over and insert a [product|IF145-101|plastic card] between the top left battery and the rear case.
[* icon_note] If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.