Salta al contenuto principale

Samsung Galaxy S6 Edge Display austauschen

Inglese
Tedesco

Traduzione in corso passo 11

Passo 11
Samsung Galaxy S6 Edge Screen Replacement: passo 0, immagine 1 di 1
  • Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments.

  • After removing all traces of glue and glass from the frame, clean the adhesion areas with 90% (or higher) isopropyl alcohol and a lint-free cloth or coffee filter. Swipe in one direction only, not back and forth.

  • If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. If necessary, replace the frame.

  • The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

Bevor du das neue Display befestigt, musst du unbedingt alle Spuren von altem Kleber vom Rahmen beseitigen, achte besonders darauf, kleine Glassplitter zu entfernen.

Reinige nach dem Beseitigen von Klebstoffresten und Glassplittern die Klebeflächen mit 90%igem (oder mehr) Isopropylalkohol und einem fusselfreiem Lappen oder einem Kaffeefilterpapier. Wische nur in eine Richtung, nicht vor und zurück.

Wenn der Rahmen verbogen ist, oder irgendwelche störenden Glas- oder Klebereste verblieben sind, wird das neue Display nicht richtig passen und kann beschädigt werden. Wenn nötig, musst du den Rahmen austauschen.

Die beste Methode, den neuen Bildschirm zu befestigen, ist, ihn mit einem passend zugeschnittenen doppelseitigem Klebeband festzukleben. Bringe das Band zunächst auf der Rückseite des Bildschirms an, und führe dann sorgfältig das Displaykabel durch den Rahmen. Richte den Bildschirm aus und drücke ihn fest.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.