Salta al contenuto principale

Reemplazo del panel frontal iPad 4G

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 11

Passo 11
Removing iPad 3 4G Front Panel: passo 0, immagine 1 di 1
  • The next few steps require extreme caution.

  • The Wi-Fi antenna is attached to the bottom right edge of the rear case of the iPad via screws and a cable. Because of the orientation of the Wi-Fi antenna, it is imperative to proceed with caution otherwise irreversible damage to the Wi-Fi antenna may result.

  • You will have to release the adhesive securing the antenna to the front panel without damaging the delicate parts attaching the antenna to the bottom of the iPad. Follow the next steps carefully.

Los próximos pasos requieren extrema precaución.

La antena de Wi-Fi está sujeta al borde inferior derecho de la caja trasera del iPad mediante tornillos y un cable. Debido a la orientación de la antena de Wi-Fi, es imprescindible que procedas con precaución, ya que, de lo contrario, la antena de Wi-Fi podría sufrir daños irreversibles.

Tendrás que soltar el adhesivo que sujeta la antena al panel frontal sin dañar las delicadas partes que sujetan la antena a la parte inferior del iPad. Sigue los siguientes pasos con cuidado.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.