iPad 4 Wi-Fi Headphone Jack Cable Replacement

Ultimo aggiornamento il June 5, 2024

Nessuna stima

Moderato

Solo Prerequisita

Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Introduzione

Internal prereq.

Strumenti

Attrezzo utilizzato in questo passaggio:

Tweezers

$4.99

Use tweezers to peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.
Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.
Pull the headphone jack assembly cable straight out of its socket on the logic board.