Wiki con Collaborazione Studenti
Un fantastico team di studenti del nostro programma educativo ha realizzato questo wiki.
Camera won't power on.
Nothing you try will turn on the camera.
Damaged/dead battery
Your battery might be dead or faulty. If the battery is dead you will need to charge it. If that does not work, the battery could be damaged and will need to be replaced. Check out this battery replacement guide for more information.
Battery installed incorrectly
The battery could have been inserted upside-down/ backwards. Make sure the battery is connected correctly. The silver connectors should make contact with the springs inside of the battery compartment.
Memory card recognition
The camera will not recognize the memory card.
Card installed incorrectly
The memory card could have been inserted upside-down/ backwards. Make sure to properly insert the card. The silver connectors should make contact with the inside of the memory card compartment.
Memory card is corrupt
The memory card could have been corrupted, and might require replacing.
Memory card not formatted to camera
If the memory card is not formatted for the camera, you will need to format the card with your computer before you can use it.
Broken/ cracked screen
The screen is broken/cracked.
You dropped your camera
You will need to replace the screen. Check out this screen replacement guide for more information.
Autofocus/lens focus
The camera will not focus .
The connector prongs for the lens may be dirty.
If the prongs that connect the lens to the camera are dirty, the lens will not function. Make sure the prongs are clean and reconnect your camera lens. Remove the external lens from the camera, and wipe off the silver metal ring with a clean dry cloth.
Flash will not work
The flash will not go off no matter what you try.
Flash burned out
Overuse can cause the flash bulb to burn out. You may need to replace it. Check out this flash replacement guide for more information.
Water damage
If the camera has water damage, the flash could fail. You may need to replace your flash. If that does not fix the problem, the motherboard can be replaced. Check out this motherboard replacement guide for more information. If either replacement doesn't help, you will need to replace your camera.
Bad battery
If the battery is bad/low/dead, the flash could be effected. Try charging or
replacing the battery. See the 'Damaged/dead battery' section above.
Broken Camera
There's a giant, ugly crack in my camera. It still works, but it looks like it's been through a category five hurricane.
Body damage
The outer body of the camera can be replaced if it's become cracked or damaged. Check out this body replacement guide for more information.
Team
USF Tampa, Team 5-2, Blackwell Fall 2015 Membro di USF Tampa, Team 5-2, Blackwell Fall 2015
USFT-BLACKWELL-F15S5G2
4 Membri
10 Guide realizzate
22 Commenti
i can take a pic but view finder doesnt come on
empmdj - Replica
Hello!!
I have a problem with my Canon t3i:
When I turn it on it starts to do the sensor cleaning automatically and it does not finish to do it more, bone that is marked in the cleaning of sensor, and it does not even allow me to turn it off nor to change of modes, I already tried with all the buttons and nothing, I have to Remove the battery to turn it off. The only way I can turn it on without doing this is in video, and then I can use it in all other modes. Does anyone know why this happens or do you know the solution?
abcmultimedios - Replica
The screen shows protect images disable or enable. Cannot view photos because of this . How do I get this off my screen
Judy Watkins - Replica
Hello
I took pictures from camera half pictures were good and the ather were blank, completely white I did not changed nothing.
when I chaqued on p.c even the white pictures had numbers ,
please can enyone tell me what was wrong.
thanks
Lunero - Replica
My screen on back of camera shows photos up side down. I reset the camera but still the same
Stewart Begg - Replica
Everything works on the camera except when I depress the shutter release nothing happens. The focus points don’t light up, the shutter does not snap. Have I inadvertently turned something off on the camera body?
Thomas Buzzi - Replica
please help, my camera will not take a picture. Only show’s that NO card, even though I have a memory card installed. Yes made sure the card is not locked, nor installed the wrong way.
debbievanhoy - Replica
My camera turns on OK but I cant take a picture - wont auto focus or click to take a picture. ??
Nancy - Replica
QUICK QUESTION! My camera no longer works and I think it’s a power problem- sometimes it won’t turn on, sometimes it will shut down after 5 mins of use and not revive . A new battery doesn’t turn it on at all.
Looking in the emptied battery compartment of my Canon Rebel T3i, I see three gold square prongs, but the battery has 4 spaces: QUESTION: should there be 4 gold bars? If so and I somehow lost one, can I replace this somehow? Thx!
albert einstein - Replica
Same here. I have no idea if it’s supposed to look like that or not
Liliana Allen -
Hello
I took pictures from camera half pictures were good and the ather were blank, completely white I did not changed nothing.
when I chaqued on p.c even the white pictures had numbers ,
please can enyone tell me what was wrong.
thanks
Richard Brightwell - Replica
When I try to take a picture, it says the memory card is locked, but it’s not
marv426 - Replica
when i insert the card, it does not hold in place and says card not recognized..
Jiblal Pokharel - Replica
I need solution on the Canon rebel power
David Emmanuel - Replica
I have rebel t3 Canon having power problem,give me solution to
David Emmanuel - Replica
My camera is shooting itself without stopping, in a continuous mode. And when I want to take a picture, nothing happens.
santd9 - Replica
Hi I replaced the battery and memory chip but it still not working the battery is fully charged what should I do now? The screen is not broken.
Ian Choi - Replica
The camera is not working
Ian Choi - Replica
it is all black
Ian Choi - Replica
i replaced my battery and camera still won't power up
Carolyn Franklin - Replica
Memory card will not eject
jimrkinney - Replica
Camera was bought from goodwill but is untested Im new to photography and the camera will not turn on, idk if it’s a broken camera or user error. I have the battery and card inserted correctly but camera still won’t turn on. Please help
Liliana Allen - Replica