Reputazione nel tempo
Dettaglio Reputazione
Evento | Conteggio | Delta |
---|---|---|
Hai tradotto una guida | 81 | 3500 |
Accettata modifica di controllo a passo | 246 | 196 |
Risposta accettata | 4 | 120 |
Accettata modifica di controllo a wiki | 37 | 37 |
Accettata modifica di controllo a introduzione | 39 | 33 |
Il post ha ricevuto un voto positivo | 2 | 24 |
A qualcuno è piaciuta la traduzione della tua guida | 2 | 10 |
Hi, first thing I would check is video output default settings, so if you have the monitor connected to a dedicated/discreet graphics card try connecting the video cable to the mobo integrated one or viceversa. Otherwise, the fix could be as simple as replacing the BIOS battery (if the motherboard you are using as replacement is an old one) but could also be a hardware failure/compatibility issue, or a missing power cable (do you hear any beep during power-on self-test?), knowing the PC specs would help identify the problem.
Solved it in the past, in my case issue was caused by paired device with faulty battery sensor. You could try turning off BT on every active device nearby (and check if the speaker now stays on) then on again one by one to find the culprit (similar question answered here: My JBL Charge 3 turns off by itself.)
First you should make sure you replaced "MyVolume" with the actual name of your device, if it doesn't appear on your desktop when you insert the drive you can easily get it by opening Finder and checking under "devices" in the sidebar. As Ich63 pointed out you will need to copy/paste in pieces as the terminal will not allow you edit the text that much. Alternatively, just rename it "MyVolume" as suggested by @jpdemers and copy/paste the command as is.
Grazie Mattia, qualora volessi contribuire sentiti pure libero di apportare miglioramenti al testo
Hola, qué modelo? Tienes raton usb y adaptador OTG a mano?
@Mattias Lindström partition table must be set to GPT, otherwise MBR/APM formatted devices’ size is limited to 2TB
Asumo que estás usando Windows, sin embargo la actualización puede haber cambiado el dispositivo de vídeo predeterminado o desactivado la salida de vídeo secundaria. Si no aparece nada en la pantalla al pulsar Shift y F8 al inicio, una solución más drástica podría ser: encender el portátil, esperar 1/2 minutos y pulsar CTRL + SHIFT + WIN + B para intentar reiniciar el controlador de la tarjeta de vídeo. Si esto tampoco funciona, podrías desmontar el portátil, desconectar la pantalla de la placa base e intentarlo de nuevo.
I suggest using a slimmer version of this wrench, it fits better and reduces the risk of leaving scratches on crank arms made of delicate materials such as carbon.
Hi, did you enable Developer Options from the Settings menu?