Skip to main content

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 7le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 6

Step 6
As you proceed with separating the adhesive, you might need to re-apply heat to each edge before you can slice the adhesive securing it. Additionally, you can use multiple opening picks for this process, leaving one in place on each side after you finish slicing to prevent the adhesive from re-adhering as it cools. Slide the opening pick along the left edge of the phone to slice through the adhesive securing the rear panel.
  • As you proceed with separating the adhesive, you might need to re-apply heat to each edge before you can slice the adhesive securing it.

  • Additionally, you can use multiple opening picks for this process, leaving one in place on each side after you finish slicing to prevent the adhesive from re-adhering as it cools.

  • Slide the opening pick along the left edge of the phone to slice through the adhesive securing the rear panel.

Per continuare a tagliare l'adesivo, può essere necessario applicare di nuovo del calore su ciascun bordo per poter staccare la colla che lo fissa.

Per questa procedura, puoi anche usare una serie di plettri di apertura, lasciandone uno inserito in ciascun lato dopo aver eseguito il taglio per impedire che la colla, una volta raffreddata, si riattacchi.

Fai scorrere il plettro di apertura lungo il bordo sinistro del telefono per tagliare la colla che fissa la cover posteriore.

[* icon_note] As you proceed with separating the adhesive, you might need to re-apply heat to each edge before you can slice the adhesive securing it.
[* black] Additionally, you can use multiple opening picks for this process, [https://d3nevzfk7ii3be.cloudfront.net/igi/EcddTJkeF1rNcZTZ.huge|leaving one in place on each side|new_window=true] after you finish slicing to prevent hethe adhesive from re-adhering as it cools.
[* black] Additionally, you can use multiple opening picks for this process, [https://d3nevzfk7ii3be.cloudfront.net/igi/EcddTJkeF1rNcZTZ.huge|leaving one in place on each side|new_window=true] after you finish slicing to prevent hethe adhesive from re-adhering as it cools.
[* black] Slide the opening pick along the left edge of the phone to slice through the adhesive securing the rear panel.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.