Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Use a spudger to disconnect the upper antenna interconnect cable from its socket on the logic board. Lift the cable connector straight up from the board, do not pry on the socket itself.
  • Use a spudger to disconnect the upper antenna interconnect cable from its socket on the logic board.

  • Lift the cable connector straight up from the board, do not pry on the socket itself.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.