Salta al contenuto principale

Sostituzione del touchscreen del Nintendo 3DS

Avviso: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Nintendo 3DS Touchscreen Replacement: passo 0, immagine 1 di 2 Nintendo 3DS Touchscreen Replacement: passo 0, immagine 2 di 2
  • Starting at the bottom right corner, insert the flat end of a spudger between the touchscreen and LCD frame and gently pry the touchscreen off the LCD.

  • Do not run the spudger down the side of the display assembly to loosen the touchscreen. The two components of the display assembly are held together by a fairly weak adhesive tape, and running the spudger between the two could tangle or damage the tape.

  • Insert the spudger into the top right corner between the two pieces and pry the touchscreen off the LCD frame.

Partendo dall'angolo inferiore destro, inserisci l'estremità piatta di uno spudger tra il touchscreen e il frame LCD e solleva delicatamente il touchscreen dall’LCD.

Non far scorrere lo spudger lungo il lato dell'assemblaggio del display per allentare il touchscreen. I due componenti dell'assemblaggio del display sono tenuti insieme da un nastro adesivo piuttosto debole, e far passare lo spudger tra i due potrebbe aggrovigliare o danneggiare il nastro.

Inserisci lo spudger nell'angolo superiore destro tra i due pezzi e solleva delicatamente il touchscreen dal frame LCD.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.