Salta al contenuto principale

Disassembling HP Pavilion 11 x360 Bottom Case

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 5le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Disassembling HP Pavilion 11 x360 Bottom Case, Remove Screws: passo 0, immagine 1 di 2 Disassembling HP Pavilion 11 x360 Bottom Case, Remove Screws: passo 0, immagine 2 di 2
Remove Screws
  • Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws.

  • You must remove eleven screws.

  • Four 9mm screws with the PH0 screwdriver.

  • Seven 6mm screws with the PH0 screwdriver.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.