Salta al contenuto principale

iPad Mini 3 Wi-Fi LCDシールドプレート交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 11

Passo 11
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 1 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 2 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 3 di 3
  • Slide the opening pick along the top edge of the iPad, stopping just before you reach the camera.

  • The third image shows where the front-facing camera and housing are in the iPad.

  • Avoid sliding the opening pick over the front-facing camera, as you may smear adhesive onto the lens or damage the camera. The following steps will detail how to best avoid disturbing the front-facing camera.

ピックをiPadの上部端に沿ってスライドさせます。カメラの手前で止めます。

3番目の画像はフロントカメラがiPadのどの位置に内蔵されているかを示したものです。

ピックをフロントカメラ上にスライドしないでください。レンズ上に接着剤が付着してしまうとカメラを損傷してしまいます。次の手順は正面カメラを傷つけないで作業を進めるための方法を扱っています。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.