Salta al contenuto principale

iPad Mini 3 Wi-Fi LCD Shield Plate austauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 7

Passo 7
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 1 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 2 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 3 di 3
  • Continue moving the opening pick down the side of the display to release the adhesive.

  • If the opening pick gets stuck in the adhesive, "roll" the pick along the side of the iPad, continuing to release the adhesive.

Fahre fort mit dem Bewegen der Plektren, bis hin zur unteren Seite des Displays, um den Kleber zu lösen.

Falls das Plektrum am Kleber hängen bleibt, bewege das Plektrum noch einmal zurück und beginne erneut damit, das Plektrum vorsichtig zum unteren Rand des iPads zu bewegen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.