Aggiusta le tue cose Community Store

iPad Mini 3 Wi-Fi LCDシールドプレート交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Giapponese
Passo successivo

Traduzione in corso passo 1

Passo 1
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 1 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 2 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 3 di 3

  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPad's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.

ディスプレイガラスにひびが入っている場合は、ガラス表面にテープを貼り，修復中に怪我をしないように注意してください。

iPadのディスプレイの表面全体が覆われように、透明テープを重ね張りします。

これにより、ガラスの破片が飛び散らず、ディスプレイを取り外す時に扱いやすくなります。

残りも手順通りに作業をしますが，ガラスが割れてしまうと，ひび割れが広がってしまいます。その場合，金属製のヘラなどを使用する必要があるかもしれません。

必ず，保護メガネを着用してください。また，液晶パネルを傷つけないように注意してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.