Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 16

Passo 16
Use the flat end of a spudger to disconnect the headphone jack connector from the logic board. Pry up only on the connector—not on the socket itself. Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.
  • Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.

  • Fold the headphone jack cable out of the way.

Utilisez l'extrémité plate d'un spudger pour débrancher de la carte mère le connecteur de la prise casque.

Faites levier uniquement sur le connecteur, pas sur la prise elle-même.

Les iPad plus récents ont une boucle de bande reliant ce connecteur à sa prise sur la carte mère. Cet adhésif doit être coupé afin de débrancher la prise casque.

Reliez la nappe de la prise casque pour qu'elle ne vous dérange pas.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.