Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 6
Passo 6
-
Wait one minute to give the adhesive a chance to release and present an opening gap.
-
If your screen isn't getting hot enough, you can use a hair dryer to heat along the left edge of the iPad.
-
Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.
-
Skip the next two steps.
| + | [* black] Wait one minute to give the adhesive a chance to release and present an opening gap. |
|---|---|
| + | [* black] If your screen isn't getting hot enough, you can use a hair dryer to heat along the left edge of the iPad. |
| + | [* icon_note] For complete instructions on how to use a hair dryer, [guide|157348|check out this guide|new_window=true]. |
| + | [* black] Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap. |
| + | [* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn. |
| + | [* icon_caution] Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you. |
| + | [* black] ***Skip the next two steps.*** |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.