Salta al contenuto principale

Sostituzione guscio anteriore Steam Deck OLED

Inglese
Italiano

Traduzione in corso passo 28

Passo 28
Steam Deck OLED Front Shell Replacement, Free the bottom edge of the midframe: passo 0, immagine 1 di 2 Steam Deck OLED Front Shell Replacement, Free the bottom edge of the midframe: passo 0, immagine 2 di 2
Free the bottom edge of the midframe
  • The midframe is almost free. The front shell secures it with clips, alignment posts, and ports along the top edge.

  • Rotate the device so the power button is closest to you.

  • Grip the bottom arms of the midframe and brace your other fingers against the front shell.

  • Use your fingers to pry the bottom edge of the midframe away from the front shell.

  • If you feel resistance, the antennas have re-adhered to the front shell. Be gentle and stop prying to check the antennas, if necessary.

  • It may be helpful to stand the Steam Deck OLED on its top edge to see the antennas as you pry.

Il telaio è quasi completamente libero. Il guscio anteriore lo tiene in posizione con dei fermagli, dei montanti di allineamento e delle porte lungo il bordo superiore.

Gira il dispositivo in modo che il pulsante di accensione sia più vicino a te.

Afferra i bracci inferiori del telaio e fissa il resto delle dita contro il guscio anteriore.

Con le dita, fai leva per allontanare il bordo inferiore del telaio dal guscio anteriore.

Se senti una resistenza, le antenne hanno aderito nuovamente al guscio. Con delicatezza, smetti di fare leva e controlla le antenne, se necessario.

Potrebbe tornare utile appoggiare la Steam Deck OLED sul bordo superiore per vedere le antenne mentre fai leva.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.