Salta al contenuto principale

Cricut Maker Front Door Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 5

Passo 5
Cricut Maker Front Door Replacement: passo 0, immagine 1 di 2 Cricut Maker Front Door Replacement: passo 0, immagine 2 di 2
  • Use a Phillips #1 screwdriver to remove four 10 mm screws on the side of the device next to the motors.

  • Use a Phillips #1 screwdriver to remove the two 22 mm screws.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.