Salta al contenuto principale

Cricut Maker Front Door Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 2

Passo 2
Cricut Maker Front Door Replacement: passo 0, immagine 1 di 3 Cricut Maker Front Door Replacement: passo 0, immagine 2 di 3 Cricut Maker Front Door Replacement: passo 0, immagine 3 di 3
  • Remove the seven screws (Four 8.5 mm screws, and three 12.5 mm screws) on the bottom of the device, this will allow you to remove the cover later on.

  • Use a Phillips #1 screwdriver to remove the four 8.5 mm screws from the bottom of the device.

  • Use a Phillips #0 screwdriver to remove the three 12.5 mm screws.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.