Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Remove the two 3 mm screws attached to the laptop's hard drive metal cage using the Phillips #00 screwdriver. Once the screws have been removed, gently disconnect the hard drive by pulling the hard drive away from the integrated SATA port.
  • Remove the two 3 mm screws attached to the laptop's hard drive metal cage using the Phillips #00 screwdriver.

  • Once the screws have been removed, gently disconnect the hard drive by pulling the hard drive away from the integrated SATA port.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.