Salta al contenuto principale

iMac M1 24インチの分解

Inglese
Giapponese

Traduzione in corso passo 15

Passo 15
iMac M1 24" Teardown: passo 0, immagine 1 di 3 iMac M1 24" Teardown: passo 0, immagine 2 di 3 iMac M1 24" Teardown: passo 0, immagine 3 di 3
  • The Apple logo on the back may not glow like on those classic MacBooks, but it's definitely still radiating. Like past iMacs, it has a cutout that acts as a convenient window for a patch antenna.

  • The display shield features two horizontal slots that hang on corresponding tabs in the case—keeping the display securely mounted. History, but no markings, point to LG Display as a likely maker of this panel.

  • The stand’s hinge hardware is no longer accessible from the outside, so choose VESA from the outset or forever hold your peace—or an iMac opening wheel.

背面についているAppleロゴは、クラシック版MacBookのように発光しませんが、明らかに放射しています。過去のiMacと同様、パッチアンテナを取り付けるための便利な切り欠きが入っています。

ディスプレイシールドには、水平に並行する2つのスロットが付いており、ケース側の対応するタブに引っ掛けて、ディスプレイをしっかりと固定します。これまでの歴史を考慮すると、表示はありませんが、パネルの製造メーカーはLG Displayである可能性が高いと言えます。

スタンドのヒンジ用ハードウェアは、外部からアクセスできなくなっているため、購入段階でVESAマウントアダプタを選択しておく必要があります。さもないとiMac用のオープニングホイールの跡ががいつまでも残ってしまいます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.