Salta al contenuto principale

Sostituzione ventola Xbox Series X

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 31le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Xbox Series X Fan Replacement, Remove the fan screws: passo 0, immagine 1 di 1
Remove the fan screws
  • Use a T8 Torx driver to remove the three screws securing the fan to the center chassis:

  • One 10.5 mm pancake screw

  • Two 8.8 mm screws

Usa un cacciavite Torx T8 per svitare le tre viti che fissano la ventola al centro della struttura:

Una vite piatta da 10,5 mm

Due viti da 8,8 mm

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.