Salta al contenuto principale

Sostituzione gruppo struttura centrale Xbox Series X

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 17le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: passo 0, immagine 1 di 3 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: passo 0, immagine 2 di 3 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: passo 0, immagine 3 di 3
Remove the center chassis assembly
  • The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.

  • Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.

  • Lift out the center chassis assembly to remove it from the shell.

  • During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

La struttura centrale è allineata al guscio con dei perni guida. Questi perni dovranno sfilarsi dai loro alloggi per permettere alla struttura di venire sollevata.

Prendi la struttura centrale e tirala verso la parte superiore del guscio, separando i perni guida dal guscio.

Solleva l'insieme del telaio centrale per rimuoverlo dal guscio.

Durante il rimontaggio, assicurati che nessuno dei cavi a nastro si schiacci mentre abbassi la struttura centrale nel guscio.

[title] Remove the center chassis assembly
[* icon_note] The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.
[* black] Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.
[* black] Lift out the center chassis assembly to remove it from the shell.
- [* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.
+[* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.