Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 3
Passo 3
Disconnect the power button cable
-
Use the pointed end of a spudger to depress the metal tab on the side of the power button cable's board connector.
-
With the metal tab depressed, use a pair of tweezers to pull up on the pull tab to disconnect the power button cable from the center chassis.
[title] Disconnect the power button cable | |
[* black] Use the pointed end of a spudger to depress the metal tab on the side of the power button cable's board connector. | |
[* black] With the metal tab depressed, use a pair of tweezers to pull up on the pull tab to disconnect the power button cable from the center chassis. | |
[* icon_caution] Pull only on the pull tab, not the cable itself. | |
+ | [* icon_caution] Don't pull on the cable without depressing the metal tab, otherwise you risk damaging either the cable or the connector. |
[* icon_reminder] During reassembly, the cable should lightly "snap" into place when inserted. |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.