/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi

Remplacement de la batterie du Samsung Galaxy Note9

Torna alla Guida
Inglese
Francese
Passo precedente

Traduzione in corso passo 2

Passo 2
Samsung Galaxy Note9 Battery Replacement: passo 0, immagine 1 di 3 Samsung Galaxy Note9 Battery Replacement: passo 0, immagine 2 di 3 Samsung Galaxy Note9 Battery Replacement: passo 0, immagine 3 di 3

  • Do not bend the battery. Do not reuse the battery.

  • Apply a suction cup to the battery.

  • It may take multiple attempts to get the suction cup to adhere. Apply is as close to the center of the battery as possible and avoid the white sticker at the bottom of the battery.

  • Use firm, steady force to lift the battery straight up until there is a gap large enough to insert the opening pick.

  • Insert an opening pick underneath the bottom edge of the battery and twist to loosen the battery adhesive.

  • If the battery won’t pry out easily, apply a little more alcohol and repeat the last step to further weaken the adhesive.

  • Remove the battery.

  • If you used isopropyl alcohol, wait ten minutes before installing the new battery to allow the alcohol to completely evaporate.

Posez une ventouse sur la batterie.

Vous devrez vous y prendre à plusieurs reprises avant de réussir à faire adhérer la ventouse. Visez le milieu et évitez l'autocollant blanc en bas de la batterie.

Soulevez la batterie à la verticale jusqu'à ce que vous puissiez insérer un médiator en dessous.

Insérez un médiator sous le bord inférieur de la batterie et faites-le pivoter pour la décoller.

Si la batterie ne cède pas facilement, remettez de l'alcool et répétez la dernière étape pour continuer à faire ramollir l'adhésif.

Enlevez la batterie.

Ne pliez ni ne réutilisez la batterie.

+[* icon_caution] Do not bend the battery. Do not reuse the battery.
[* black] Apply a suction cup to the battery.
[* icon_note] It may take multiple attempts to get the suction cup to adhere. Apply is as close to the center of the battery as possible and avoid the white sticker at the bottom of the battery.
-[* black] Lift the battery straight up until there is a gap large enough to insert the opening pick.
+[* black] Use firm, steady force to lift the battery straight up until there is a gap large enough to insert the opening pick.
[* black] Insert an opening pick underneath the bottom edge of the battery and twist to loosen the battery adhesive.
[* icon_note] If the battery won’t pry out easily, apply a little more alcohol and repeat the last step to further weaken the adhesive.
[* black] Remove the battery.
-[* icon_caution] Do not bend the battery. Do not reuse the battery.
+[* black] If you used isopropyl alcohol, wait ten minutes before installing the new battery to allow the alcohol to completely evaporate.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.