Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 13

Passo 13
Lift the back cover slowly. Use opening picks to slice any remaining adhesive. Remove the back cover.
Remove the back cover
  • Lift the back cover slowly. Use opening picks to slice any remaining adhesive.

  • Remove the back cover.

  • During reassembly, this is a good point to power on your phone and test all functions before you seal the back cover in place. Be sure to power your phone back down completely before you continue working.

  • Follow this guide to replace the back cover perimeter adhesive before resealing your device.

バックカバーをゆっくりと持ち上げます。開口ピックを使って、残りの接着剤を切開します。

バックカバーを取り出します。

再組み立ての際は、バックカバーを密封する前に、デバイスの電源を入れて、全ての機能が動くかテストをすることをお勧めします。再組み立て作業に戻る前に、デバイスの電源を必ず切ってください。

このガイドを参照してバックカバー周辺の接着剤を交換してから、デバイスを密封してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.