/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi

iPad Mini CDMA モデルのバッテリーの交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Giapponese
Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2
iPad Mini CDMA Battery Replacement: passo 0, immagine 1 di 2 iPad Mini CDMA Battery Replacement: passo 0, immagine 2 di 2

  • Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Flip the iPad back over and insert a plastic card between the top left battery and the rear case.

  • If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

次の手順では、薄いプラスチックカードをバッテリーとiPadの裏ケースの間に差し込んでスライドさせます。バッテリーに留められた接着剤を剥がすようにして動かします。バッテリーを曲げてしまわないように、できるだけカードをまっすぐな状態でスライドしてください。バッテリーが曲がってしまうと危険な化学物質が排出される恐れがあります。

iPadを裏返して、上部左側のバッテリーと裏ケースの間にプラスチックカードを差し込んでください。

接着剤にかなりの抵抗力がある場合は、iOpenerを再度温めて、接着剤を柔らかくするために前回の手順を繰り返してください。

[* icon_caution] Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.
-[* black] Flip the iPad back over and insert a plastic card between the top left battery and the rear case.
+[* black] Flip the iPad back over and insert a [product|IF145-101|plastic card] between the top left battery and the rear case.
[* icon_note] If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.