Salta al contenuto principale

iPad Mini CDMA Front Panel Austausch

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 8

Passo 8
iPad Mini CDMA Front Panel Replacement: passo 0, immagine 1 di 3 iPad Mini CDMA Front Panel Replacement: passo 0, immagine 2 di 3 iPad Mini CDMA Front Panel Replacement: passo 0, immagine 3 di 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

Nimm das erste Plektrum an und schiebe es am iPad nach oben.

Erschrick nicht, wenn du die Spitze des Plektrums durch die Glasscheibe sehen kannst, ziehe das Plektrum nur ein Stückchen zurück. Meistens ist alles in Ordnung, versuche trotzdem das zu vermeiden, es könnte nämlich etwas Kleber direkt auf das LCD kommen und das ist schwierig zu entfernen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.