Traduzione in corso passo 1
Passo 1
-
Turn the device housing the circuit boards over to the side with the mounted camera.
-
Remove the three 3 mm Phillips head screws located on the top circuit board.
| - | [* black] Turn the |
|---|---|
| - | [* red] Remove the three 3 |
| + | [* black] Turn the device housing the circuit boards over to the side with the mounted camera. |
| + | [* red] Remove the three 3 mm Phillips head screws located on the top circuit board. |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.