Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.
Traduzione in corso passo 5
Passo 5
Main board removal
-
Remove the nut and washer holding the 6.25mm guitar input jack to the chassis
-
Disconnect any wires going from the board to other parts of the chassis, such as to the power switch or power transformer
-
Identify and remove any other screws that might prevent removal of the board. On my Ibanez, two screws held the power amplifier IC heat-sink to the chassis. Removal of the screws and their accompanying lock washers allowed the board to be lifted off with the heat-sink
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.